Welcome to the official website of Saa Grid Technology Co.,Ltd.!
PRODUCT CENTER
A professional manufacturer of power equipment integrating R&D, production and sales.
Product details
66kV Polymer Line Post Insulator
Polymer Line Post Insulator
Molded line posts are a standard product and are ideally suited for 66kV post applications.
The modular design allows custom applications to be adapted to any end user's unique environment.Saa Grid offers a variety of standard and custom line posts for your power and utility needs.
Polymer post insulators are specifically designed to withstand the demands placed on them by extreme weather conditions and weather fluctuations. The polymer post insulator flanges are sharp and narrow, and their shape and creepage distance are best suited to address contamination issues. Even strong arcs cannot damage cast resin polymer post insulators. Surface scars caused by flashover can be easily repaired by smoothing and cleaning the markings and rubbing a thin layer of silicone paste on the surface. This treatment will not reduce the flashover strength of the insulator. Cast resin polymer pillar insulators also have high chemical resistance.
Polymer pillar insulators can be used in areas where the atmosphere contains high levels of corrosive gases such as sulfuric acid and nitrogen-containing compounds. Indoor polymer pillar insulators can be installed in any selected location. The operating position of outdoor polymeric pillar insulators can be varied from vertical to horizontal. Aluminum composite busbar clips are used to secure busbars to polymeric pillar insulators. The size and location of the busbar stack and the type of insulator used determine the type of busbar clamp. The dimensions of the busbars have been calculated so that if the busbar stacks do not exceed the width of the busbars, they will be subjected to greater mechanical strain than the corresponding supporting polymeric pillar insulators.
Named:
Polymer line post Insulator also called composite line post Insulator, silicone rubber line post insulator.
Structure:
Silicone rubber shed
Silicone rubber housing
Fiberglass core rod
End fittings
Parameter:
System voltage: 66kV, 69kV, 70kV
Strength: 5kN, 6kN, 8kN, 10kN
Color: grey, red or customerised
Creepage distance: 21mm/kV, 25mm/kV, 27mm/kV, 33mm/kV, 40mm/kV
Design according requirement
Top Fitting type:
Tie top – normal neck diameter
C-neck
F-neck
Vertical clamp neck
Horizontal clamp neck
Specification:
Rated System Voltage (kV) |
Type |
Section Length (mm) |
Arcing Distance (mm) |
Creepage Distance (mm) |
Specified Cantilever Load (kN) |
Specified Tensile Load (kN) |
Lightning Impulse Withstand Voltage (kV) |
Power Frequency Withstand Voltage (kV) |
|
Dry |
Wet |
||||||||
66 | FZS-66/5 | 830 | 630 | 1800 | 5 | 70 | 410 | 230 | 185 |
66 | FZS-66/8 | 830 | 630 | 1800 | 8 | 70 | 410 | 230 | 185 |
Order Information: 1.Voltage grade; 2.Specified mechanical load; 3.Creepage distance; 4.Power frequency withstand voltage; 5.Lightning Impulse Withstand Voltage; 6.Insulation distance; 7.Coupling type Ps. Different design could be supplied as customer requirements |
SCHEMATIC DIAGRA
① Shed connected with core by integral forming
② Metal end fittings, core and sheds connected by new crimping process
③ The thickness of housing > 3mm, uniform thickness, confirm to IEC Standard
④ Acid resistant, high temperature resistant of epoxy fiberglass core
⑤ The material of metal end fittings is used with hot galvanization and technology of rare earth aluminum
coating to avoid coating shedding when crimping, prolonging the service life of the product
FAQ
1.Do you accept OEM or ODM?
Yes,we're a factory, any your customized requirements we can do our best to help you realize.
2. How does your factory do regarding quality control?
All the products will be 100% checked before the shipment and we have pass through the QC System.
3.Can you provide samples?
Yes,plesae contact us to know the sample policy.
4.Usual Payment Term.
We accept terms of T/T, L/C, Western Union and others. Any question, please ask us!
5. Can I visit your company or website?
Of course, you are welcome.
If you are interested in our products, please contact us.